A leaking or damaged roof is never just a "drip" problem. Left unaddressed, water travels through roof cavities into insulation, ceiling plasterboard, timber framing, and electrical systems, causing mould growth, timber rot, structural damage, and potentially dangerous electrical hazards. What starts as a $400 tile replacement can become a $15,000 structural repair if ignored through a Melbourne winter.
Our team of licensed roof plumbers work across Melbourne from heritage weatherboards in Fitzroy and Northcote, to modern tile homes in Glen Waverley and Doncaster, to commercial and strata properties across the CBD fringe and outer suburbs. Whatever the roof type, whatever the problem, we have the experience to fix it right the first time.
We work on:
Roof leaks can happen for many reasons, but they rarely fix themselves. In fact, roof leaks often worsen over time, especially during Melbourne’s wet and windy seasons. Most leaks are caused by weather damage, ageing materials, blocked drainage systems, or poor-quality previous repairs.
The reason why you have damaged fascia boards, ceilings, and walls is that leaves, dirt, and debris are clogging your gutters and downpipes, causing water to overflow and seep beneath roofing materials.
Storms, hail, falling branches and foot traffic during maintenance are the causes of your roof tiles cracking that allow rainwater to enter your roof cavity.
Flashing seals vulnerable roof areas around your chimneys, skylights, vents, and valleys. When flashing rusts, lifts, or deteriorates, water can easily penetrate the roof.
All roofing materials eventually wear down. Older roofs often develop brittle tiles, corroded metal sheets, and weakened waterproof barriers.
Areas around solar panels, vents, pipes, and skylights are common leak points if seals become damaged or poorly installed.
Low-quality workmanship can leave gaps, weak seals, or improperly secured materials that fail during heavy rain or strong winds.
Roof leaks are not always immediately obvious. Sometimes water travels through roof cavities before becoming visible inside the property.
Here are some warning signs to watch for:
Here are indicative ranges so you can plan before you call:
|
Roof Repair Service |
Typical Cost Range |
|
Single broken or cracked tile replacement |
$200–$450 |
|
Multiple tile repairs (4–10 tiles) |
$400–$900 |
|
Ridge capping re-pointing (per metre) |
$80–$150/m |
|
Flashing repair or replacement |
$350–$900 |
|
Gutter repair or replacement (per metre) |
$60–$120/m |
|
Skylight flashing repair |
$400–$800 |
|
Storm damage assessment + emergency make-safe |
$350–$700 |
|
Complete roof restoration (tile) |
$4,000–$15,000+ |
|
Full roof replacement (tile) |
$12,000–$35,000+ |
All pricing is indicative and subject to roof size, pitch, material, access conditions, and extent of damage. We provide a fixed, upfront quote after inspection with no hidden costs, no surprises. No call-out fee.
For more information about the roof repair cost and what to expect, click here.
My Plumbing Services provides comprehensive roofing solutions across Melbourne. We don't just treat the visible symptom, we identify and fix the actual source, then inspect the surrounding area for secondary damage.
We locate the true source of your leak and not just the ceiling stain. Using professional diagnostic techniques and 25 years of hands-on experience with Melbourne's housing stock and weather patterns. Then we fix it properly so that last long-term.
Broken, cracked, displaced, or missing tiles are replaced with colour-matched alternatives. We work with terracotta, concrete, and slate tile systems across Melbourne's residential market.
Rusted, lifted, or damaged Colorbond® steel and corrugated iron repaired or replaced. We understand how Melbourne's thermal cycling affects metal roofing systems and use appropriate materials and techniques for lasting repairs.
Deteriorated ridge capping mortar is one of the most common and most underdiagnosed causes of roof leaks in Melbourne homes, particularly in properties built before 1990. We remove failed mortar and re-point with flexible, weather-appropriate compounds designed for Melbourne's conditions.
We can handle all flashing types, including step flashing, apron flashing, valley flashing, skylight flashing, and chimney counter-flashing, repaired or fully replaced using appropriate materials. Correct flashing installation is the single most important factor in preventing recurring roof leaks.
Rusted, split, or sagging gutters repaired or replaced. Downpipes cleared, repaired, or rerouted. Gutter guard installation available to reduce maintenance frequency.
Same-day emergency response for storm-damaged roofs. Temporary make-safe available where full repairs require scheduling. Written reports provided for insurance claims.
When a roof has reached the end of its serviceable life, restoration or full replacement becomes more cost-effective than ongoing patch repairs. We provide honest, straightforward assessments and clear quotes for both options. So, you can make the right decision for your property and budget.
Waterproof coatings and sealant treatments to extend roof life, improve weather resistance, and address areas of widespread minor deterioration on tile, metal, and flat roof surfaces.
Step 1: Detailed Roof Inspection. We inspect roofing materials, gutters, ridge capping, flashing, drainage systems, and all roof penetrations to identify the full extent of the issue and not just the visible damage. We use binoculars, drone assessment where available, and direct roof access to get the complete picture.
Step 2: Leak Source Identified and Explained. Using 25 years of Melbourne roofing experience and professional diagnostic methods, we trace the actual source of the leak, which is often significantly removed from the visible ceiling stain. We explain exactly what we've found before any work begins.
Step 3: Professional Repair Using Climate-Appropriate Materials. Our team carries out targeted repairs using materials specifically selected for Melbourne's climate, the thermal cycling, UV exposure, and sustained winter rainfall that accelerates roofing deterioration faster than in most other Australian cities.
Step 4: Final Inspection and Confirmation. Before we leave, we conduct a full post-repair inspection to confirm the roof is watertight and correctly functioning. We don't consider the job complete until we're confident the repair will hold through Melbourne's next significant weather event.
The best repair is the one you never need to make. Here's how to protect your Melbourne roof proactively:
A thorough inspection once a year catches developing issues like deteriorating flashing, crumbling ridge mortar, and early tile cracking, before they become active leaks. The cost of an inspection is a fraction of the cost of the repair it prevents.
Spring and autumn cleaning is the minimum for most Melbourne properties. Homes under significant tree coverage, common across the inner suburbs and eastern hills, may need quarterly cleaning. Clear gutters mean water flows away from your roof structure as designed.
Tree branches over the roof deposit leaf debris into gutters, create physical tile damage risk during storms, and provide access routes for possums who cause their own category of roof damage. Keep branches well clear of the roof surface.
Check visible flashing around chimneys, skylights, and solar panels for signs of lifting, separation, or cracking. These are the highest-probability leak sources on most Melbourne roofs.
A cracked tile, a small rust patch, a slightly displaced flashing — none of these seems urgent. All of them become urgent after a Melbourne winter if left unaddressed. Act on small issues while they're small.
You get fair, honest, and transparent plumbing services whenever you choose us. Here is what you can expect:
We understand the unique Melbourne homes, the heritage tiles, the 1970s brick veneers, and the modern Colorbond® roofs. We know how Melbourne's climate ages each roof type and what the right fix looks like for each.
All roof plumbing work is carried out by our licensed, insured team in full compliance with Victorian licensing requirements. We issue a Certificate of Compliance for all notifiable work, protecting your insurance and your property record.
Roofs don't choose convenient times to fail. We're available around the clock for genuine emergencies like active leaks, storm damage, sagging ceilings, and post-event inspections.
We assess your roof and give you an upfront, transparent quote before any work begins. No fee just for showing up. No surprises on the invoice.
We stand behind every repair we make. Our 25-year labour warranty reflects the confidence we have in our workmanship and our materials.
We'll tell you what your roof actually needs. Not the most expensive option, not a temporary patch that brings us back next season. Honest assessments and clear communication, every time.
Don't wait for a small issue to become an expensive structural problem. Whether you need an emergency repair tonight or a scheduled inspection and quote, My Plumbing Services is ready to help. Call us now at 03 9071 4424. Available 24 hours a day, 7 days a week. No call-out fee. Transparent pricing.
Got some plumbing issues other than roof repair? Our team also specialised in blocked drains, hot water repairs, gas installations & repair, tap installations, leak detection, and pipe relining.
You can request a quote here.
